Durotech 007FC is a Class 3 fast curing water based and micro fibre reinforced hybrid waterproofing membrane which provides excellent flexibility and crack bridging capability.

Fast cure

• Fast drying. Recoat in 2 hours

• Flood test after 24 hours

• Can be tiled over after 4-6 hours

• Class III, high elasticity as per AS/NZS 4858 Wet Area Membranes

• Water-based, pre-mixed -ready and easy to use and easy clean up

• Environmentally friendly –LOW VOC and free of respirable silica

• For commercial and residential internal/external wet areas, balconies, decks and other areas that will be tiled over

GRIPSET 38FC is a next generation, water based, fast curing, fibre reinforced SBR latex membrane designed for waterproofing applications to internal and external areas that will be covered over with toppings, tile beds or overlay finishes Gripset 38FC utilises the latest in fast cure technology, enabling rapid recoat and tile over times.

Fast cure

• Internal wet areas, bathrooms, laundries and tiled areas

• External wet areas balconies, decks, podiums, terrace floors

• Roofs and rooftop terraces to be covered over with screeds and toppings

• Sandwiching between existing and new concrete substrates

• Liquid vapour barrier between toppings and slabs

• General tiled areas to prevent moisture ingress

Duromastic P15 DIAMOND is a polyurethane modified copolymer acrylic waterproofing membrane specifically formulated for non exposed areas such as bathrooms, laundries, balconies, terraces and other wet areas. Use Duromastic P15 DIAMOND prior to installing mortar beds, render or tiling. The membrane forms a grey coloured water resistant elastomeric film with excellent durability.

Use Area

• Internal & External Wet Areas

• Balconies & Decks Bathrooms

• Kitchens

Laundries Roof Areas

Surface

Concrete and concrete blockwork Masonry, brick Fibrous cement sheeting Particle board that complies with AZ/NZS 1859.1 (when primer with Duromix Wbe Hibuild Epoxy Primer)

RLA WPU is an elastomeric one-part polyurethane/Acrylic fibre reinforced water-based membrane developed as a high-performance internal/ external membrane for most general waterproofing applications. It is suitable for external applications where a UV stable, occasional trafficable membrane is required.

RECOMMENDED USE:

• Concrete after curing 28 days

• Masonry / render after curing at least 7 days

• Cement sheeting / underlay / external weatherboard / blue board

• Pre-cast concrete once the release agent has been removed/ dissipated

• Wet area plasterboard / Villaboard

• Structural Plywood Type A (PAA JAS-ANZ)

Sikalastic® WPU is a premixed, single component, water based polyurethane waterproofing membrane. 

Sikalastic® WPU is a Class III membrane with high extensibility and forms an elastomeric, seamless waterproofing membrane for use in internal and external applications for under tiled finishes including shower recesses, bathrooms, laundries, decks, balconies, podiums and rooftops. 

Sikalastic® WPU has low VOC and adheres to a wide variety of substrates. 

Usage

• Concrete

• Sand/cement screeds

• Cement Render

• Fibrous cement sheeting

• Compressed fibrous cement sheeting

• Water resistant plasterboard

Dampfix® Platinum is an all-in-one, one-component rapid drying water based polyurethane, Class 3 waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858.

• Rapid Drying: Allows for faster project completion with a recoat time of just 1-2 hours.

• Flexible:** Accommodates movement in substrates, ensuring long-lasting protection.

• Excellent Adhesion: Bonds well to a variety of substrates, including concrete, cement sheeting, and plasterboard.

• UV Resistant: Suitable for both internal and external applications.

• Low VOC: Environmentally friendly with low volatile organic compound emissions.

• Crack Bridging: Capable of bridging cracks up to 2mm, providing robust waterproofing.

HYDRO BAN® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of substrates. HYDRO BAN is a low VOC emitting product that has been GREENGUARD certified.

• Faster flood testing over fresh mortar beds and at cooler temperatures

• IAPMO and ICC approved

• Anti-fracture protection up to 3 mm

• Easy to clean with water

• Meets and exceeds the requirements of AS4858 and AS4654.1

Barrierbond Fast (2P) is 2 component fast-drying membrane that can be tiled in 24 hours at 20oC. BarrierbondFast (2P) can be recoated after 90 minutes. It also has a high resistance to detergents and bleaches. BarrierbondFast (2P) is easy to mix, with a simple mixing ratio and is suitable for all interior wet areas and exterior decks and balconies under-tile.

Substrates

Concrete, renders, screeds, Bonded waterproofing membrane, blockwork, gyprock, plaster board fibre cement, Scyon board and Plywood fixed to AS/NZ 2269.0 2012.

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools.

• High performance: a 2 mm thick film has a crack-bridging capacity of >2 mm.

• Excellent mechanical characteristics, especially when reinforced with Mapetex Sel or Mapenet 150 reinforcement.

• CE-certified product in compliance with EN 1504-2 and EN 14891.

• Excellent elongation at failure (170%, Class II AS/NZS 4858).

• Fluid consistency for easy application.

• Resistant to UV rays